We manufacture bitumen of two grades as follows:
Constituents of bitumen emulsion
Bitumen suppliers provide various grades of bitumen emulsion to be used in road construction. The constituents of bitumen emulsion generally are as follows:
Bitumen
The fundamental ingredient of emulsion, bitumen approximately makes up to 60%. It is fetched from refining crude oil and it is a petroleum product used in road construction. Bitumen emulsion suppliers are well aware of the quality of the bitumen emulsion depending on the properties of bitumen. The hardness of the bitumen may vary but it generally falls between 25-200 penetration range. At Bedrock Chem Infra LLP, we manufacture bitumen emulsion as per Indian Standard IS 8887:2017 as well as International Standard ASTM D 2397.
Water
Bitumen emulsion manufacturers make bitumen emulsion using water and an emulsifying agent. The water may contain stability products and other minerals, Water with colloidal suspension or impurities is not suitable for manufacturing bitumen emulsion. So, Bitumen emulsion suppliers pay attention to the compounds in water such as calcium and magnesium. The irons can be a benefit in the formation of the cationic bitumen emulsion.
Emulsifying agent
Bitumen emulsion is a surface-active agent. Surfactants are substances that change the properties of water and bitumen droplets. The emulsifying agent makes bitumen a stable suspension while controlling the breaking time.
Constructing environmentally friendly roadways with the bitumen emulsion suppliers in Mumbai
Our bitumen emulsion is perfect as a binder and waterproofing material for your road construction projects. The vision of constructing a strong and lasting road is possible with the help of trusted Bitumen emulsion suppliers. New construction technologies allow varied uses of bitumen. The road construction companies can lower the carbon footprint and green emission using our different grades of bitumen emulsion.
Testimonials
Clients
Raj Path Infracon Pvt Ltd. created a World Record by constructing a single lane 39.691 KMs long stretch of road in 24 hours. Our world record has been noted by Limca Book Of Records. This remarkable feat was successful because of your valuable and timely support.RAJ PATH INFRACON PVT.LTD.
We used Bitumen Emulsion RS1 and SS1 Manufactured by Bedrock Chem infra LLP for our following Projects - Lonikand , Digras Darhwa, Warangal, Vellore, Akot - Akola We wish to confirm that product quality is good and upto the mark. Thanks & RegardsPATIL CONSTRUCTION & INFRASTRUCTURE LTD.
We used Bedrock Chem Infra LLP - (WADA Maharashtra) Road Emulsion RS1 for our M/s. Malegaon Manmad Kopargaon Toll Road Pvt. Ltd. project. The Product and Quality of the material found satisfactory.VISHVARAJ INFRASTRUCTURE LTD.
SUCCESS INDICATORS
3
Certifications
200
+ Clients
85
% Retention
Trusted Partner for Road construction
We are an ISO 9001:2015 and ISO 45001:2017 certified company deployed with highly qualified engineers and chemists. Our products carry the prestigious BIS certificate
UPDATES
LATEST POSTS
Providing Essential Equipment for Ensuring Traffic Safety and Management
Traffic safety and management are critical aspects of maintaining a…
Choosing the Right Products for Effective and Long-Lasting Road Repairs
Blog: Roads are essential infrastructure that undergo constant stress from…
Delivering Reliable and Customized Road Construction Solutions
Efficient road construction is the backbone of a well-functioning transportation…
Get in Touch
Contact us
Bedrock - The best Rapid Setting Bitumen Emulsion ( RS1) Manufacturers & Suppliers in Mumbai, Maharashtra
Rapid setting Emulsion Rs -1
Bitumen emulsion has a great role in building the roads of tomorrow. It is an unavoidable product in the construction industry. It is a stable mix of liquids, an emulsifier or surface-active agent is added into bitumen before adding water. There are many grades or varieties of bitumen emulsion available in the market for different purposes in building sturdy roads. Rapid setting bitumen emulsion manufacturers in Maharashtra produces bitumen emulsion, namely Rapid setting emulsion RS -1.
The use of asphalt emulsions or bitumen emulsions dates back to the 1900s and since then it is regarded as a cost-effective, general paving solution. At Bedrock, we manufacture different types of bitumen emulsion as per the requirements. We are one of the leading RS 1 bitumen emulsion manufacturers in Mumbai for construction purposes. However, it is noteworthy to note that the efficiency depends upon the nature of work, aggregate type and setting time.
Bitumen Emulsion:Rapid setting bitumen emulsion
Rapid setting Bitumen emulsion suppliers produce this fast bitumen emulsion widely for tacking coat applications. It breaks down at lightning speed as it comes in contact with the aggregate. Thus, helps in rapid setting and clears all wrinkles, patches on the road. We are one of the bitumen emulsion Rapid setting bitumen emulsion manufacturers in Maharashtra producing Rapid setting emulsion. It is a water-based emulsion that contains bitumen and aggregate. It is known for its rapidness and used as a perfect solution for roads. The peculiarity of this emulsion is it has low viscosity and fast setting time. The sudden reaction of the rapid setting emulsion RS-1 with aggregate is well known. With aggregate, it reverts from emulsion state to bitumen. Tack coat application is one of the major applications. Being one of the Rapid setting bitumen emulsion manufacturers, we manufacture RS -1bitumen emulsion according to the guidelines of IS 8887. We supply all types of bitumen emulsion including rubberized bitumen emulsion in bulk as we have our own manufacturing unit to cope up with any higher demands. Besides, we also supply HDPE/MS drums.
Bedrock is one of the prominent RS 1 bitumen emulsion manufacturers in Maharashtra that providing high-quality RS-1 grade bitumen emulsion in bulk for large construction projects. Choose the best RS 1 bitumen emulsion manufacturers for guaranteed results. The following are the winning advantages of our RS -1bitumen emulsion.
Advantages
- Better shelf life
- Good adhesion properties
- Better particle size distribution
- Easy to spray
Rapid setting Bitumen emulsion suppliers engaged in the production of Rapid setting emulsion RS -1 adhere to IS 8887 standards. At Bedrock, we also manufacture bitumen emulsion as per industry standards for maintaining greater quality. The rapid setting emulsion is inevitable for road maintenance and construction. Based on the surface charge there are two types of rapid setting emulsion. Anionic bitumen emulsion and cationic bitumen emulsion. Besides, this can be used in any weather conditions including wet. It is also environmentally friendly and can be used without a second thought. Therefore, by choosing the best Rapid setting bitumen emulsion suppliers, you will get the best results.